If you are planning to install a cabinet hinge, it’s important to know how to drill holes in a 35mm hinge. This process requires precision and careful measurements to ensure that the hinge is installed properly. In this article, we will discuss the steps involved in drilling holes for a 35mm hinge, along with some tips for successful installation.
Before you begin, it’s essential to determine the type of cover hinge you are using. There are three common types: full cover, half cover, and inner hide. Each type has specific requirements for installation, so make sure you choose the right one for your cabinet.
For this article, let’s focus on the installation of a full cover hinge. Start by measuring the thickness of your cabinet door panel. In most cases, the door panel is 18mm thick. Keep this measurement in mind as you proceed with the installation.
To begin drilling the cup end hole, mark a spot on the door panel that is 5mm away from the edge. This distance is crucial to ensure that the hinge is correctly positioned and allows the door to open and close properly. Use a measuring tape and pencil to mark the exact spot before drilling.
Next, you will need to drill the 35mm cup end hole. Use a drill bit specifically designed for this purpose. Secure your cabinet door panel firmly, ensuring that it doesn’t move during drilling. Begin drilling carefully, making sure that the drill bit remains perpendicular to the door panel to avoid any mistakes.
After drilling the cup end hole, it’s time to install the cup end of the hinge. Insert the hinge into the hole, making sure it fits snugly. You may need to use a rubber mallet to gently tap the hinge into place.
Lastly, you will need to install the base of the hinge. Measure a distance of 37mm from the edge of the side panel and mark the spot. This measurement ensures proper alignment and allows the cabinet door to open and close smoothly. Secure the base of the hinge at this marked spot, ensuring it is flush with the side panel.
By following these steps, you can successfully drill holes in a 35mm hinge and install it properly. Remember to take accurate measurements and use the correct tools for the job. With the right technique and attention to detail, you can achieve a seamless and functional cabinet hinge installation.
Post time: Nov-04-2023
